Music Man Amps Discussion Forum » Adjustments, Maintenance & Calibration » Vibrato not working
| Author |
Message |
| christian hanlon |
| Posted on Wednesday, February 11, 2004 - 08:58 am: |
|
I have a MM RD 115, Chassis no: 2275-65
I don't have the RCA pedal for this amp (looking for one right now!) and have noted that the vibrato on the amp doesn't work. When I crank up the volume and short out an RCA to the vibrato pedal input in the back of the amp, I can actually hear the hiss going through the vibrato. However, any instrument going into the channel doesn't get vibrato at all. I have read that there is a trim pot that might need to be turned up in the chassis - where is that located?
Thanks for reading this!
christian |
| michael Kaus |
| Posted on Thursday, February 19, 2004 - 05:03 am: |
|
Not sure on the RD's, but if it's in the same area as the HD's, it's on the preamp board, on the end by the bias pot. |
