HD-130 Reverb Tank

jochen.wendeba…


HD-130 Reverb Tank

Music Man Amps Discussion Forum » Reverb Spring ("Tank") » HD-130 Reverb Tank

Author Message
 Nate (auerilas)
Username: auerilas
Registered: 03-2007
Posted on Monday, April 23, 2007 - 08:31 am:   

I'm looking to add a reverb tank to my HD-130 Reverb, which came second-hand without it, but I can't seem to find the right one. Does the Accutronics website list the correct tank for it? Any help on this would be appreciated
 T.E. Price (uposb4)
Username: uposb4
Registered: 05-2006
Posted on Monday, April 23, 2007 - 07:31 pm:   

Try This site. http://www.tubesandmore.com/
 Mike Kaus (mm210)
Username: mm210
Registered: 05-2006
Posted on Tuesday, April 24, 2007 - 04:20 am:   

The one in my 130 HEAD was a 4FB3A1B.
 Nate (auerilas)
Username: auerilas
Registered: 03-2007
Posted on Wednesday, April 25, 2007 - 08:03 am:   

Thanks. Based on the part number i found the right one on the tubesandmore site. Wasn't sure of the impedances. Thanks again.
 Mark P. (mark_p)
Username: mark_p
Registered: 10-2008
Posted on Monday, October 06, 2008 - 06:55 pm:   

I've seen the 4FB3D1B cited as used by MM -- it has the same specs as the 4FB3A1B except the "A" has grounded inputs/outputs, while the "D" has insulated inputs/outputs.
I suspect the "D" is the safer bet, since it prbably easier to convert insulated inputs/outputs to grounded if necessary, rather than vice versa.