210-65 caps

I'm having a real hard time sourcing new electro' caps for my amp. 150uf/50v. I can find lead free ones, maybe those would be fine. Also would the easy to find Sprague's work, as far as physical size goes, for the 100uf/450v's? Were they all silver from the factory? I have some blue Mallory's in there.
Got this amp from a rummage sale for $25.00. Original speakers and tubes. What a great amp. Haven't had one since the 70's and I think it was a 410-65.
Any help would be greatly appreciated - thanks

I'm sorry if if looks like I'm bragging about the price I got this for, but you must understand that I can't even win a turkey!}}

Well, the 150 at 50's are getting harder.https://taweber.powweb.com/store/capord. htm
Weber is slow to pack and ship though. The Spragues should fit fine. Tride has the 100@450's but for the 150 @ 50 you might have to gang two together in parallel.Remember that you can go up in voltage rating without any problem. Why the hell can't I get stuff like that for $25.00 (jealous!). Mike. By the way, you CAN use the radials in the 150 @ 50 slot. Ugly but they work. THEY are cheaper at mouser that way. Nichicon is good stuff.

By the way, AES has 100's and 50's that you can gang together. Mike.

OK-did some more snooping. Seems like here-has the best asst. Some are radials but thay have axials too.http://www.newark.com/jsp/search/browse. jsp?N=422+217007+810045290+810053110+810 029780+810029779+810029773+810049424&No= 0&getResults=true&appliedparametrics=tru e&locale=en_US&divisionLocale=en_US&cata logId=&skipManufacturer=false&skipParame tricAttributeId=&prevNValues=422+217007& mm=1000002||,1000360||,&filtersHidden=false&applie dHidden=false&autoApply=false&originalQu eryURL=%2Fjsp%2Fsearch%2Fbrowse.jsp%3FN% 3D422%2B217007%26No%3D0%26getResults%3Dt rue%26appliedparametrics%3Dtrue%26locale %3Den_US%26divisionLocale%3Den_US%26cata logId%3D%26skipManufacturer%3Dfalse%26sk ipParametricAttributeId%3D%26prevNValues %3D422%2B217007

Mouser has them.
Part # 75-TVA1311-E3www.mouser.com
The 100uF/450V part # is 75-TVA1718-E3 . These will fit in MM amps too.
Good score! Well worth bragging about.
Cheers,
Lars Verholt

Okay, I found the two 100/450's and the five 150/50's. I should replace the two 20/450's I'm guessing also, right? Any others I should be concerned about? The amp is pretty quiet. By the way, mine is the 12AX7 driver model (2275-65 chassis?) It looks like some have been replaced already if they were all silver from the factory. Three of the 150/50's are blue Mallory's and the two 20/450's are also blue Mallory's. But maybe I should just do all of them and start fresh. I love the sound of this amp. Warm, very warm with the original "fat boys". Tried some early 2000's winged C's but didn't care for them, even after a few bias adjustments.
I really am impressed with this forum. You have done a great job and I really appreciate the help - thank you.
gwmn

Unless you can find a date on the chassis saying "changed on such and such a date", I would just change them all. ESPECIALLY the ones, in your case, on the driver board and bias supply board. VERY IMPORTANT. Blue Mallory's could still be 20 years old.

Hello again. I'm finally getting time to order caps. Will the mouser P/N 647-TVX2W220MCD work fine for the 20uf's under the hood? I do have some brand new sprague 20/450's in another amp I could pull.
Thanks again

Hello again,
Just wondering if the mouser p;n 647-TVX2W220MCD will work fine for the 20uf's under the hood. I do have some new sprague atom 20uf/450's in another amp I could pull if it's critical to stay at 20 here on these amps.
Thanks again

Didn't mean to post the same question twice. Didn't see the first one, so I thought I messed it up. Thanks

That will be fine. That's pleny close unless they are drastically out of spec, which I doubt.