Easy TRS Adapter
I decided to try out the Front Panel inserts on my RD112-100 with a new Chorus pedal. I needed the mysterious Tip-Ring-Sleeve (6.3mm Stereo plug) into two 6.3mm Mono plugs cable. The local electronic shop didn't have the required cable, but it had lots parts, so I assembled the following:
3.5mm Stereo to 2 RCA cable - 6-ft
Audio plug adapter 6.3mm Stereo (i.e tip-ring-sleeve) to 3.5mm Stereo
Audio plug adapter 6.3mm Mono to RCA jack
total cost $10.95
It works really well with the Chorus pedal (which I am very happy with also...)
Member for
10 years 9 months
Member for
10 years 9 months
I thought about soldering it
I thought about soldering it together from scratch...just seemed easier to buy stuff that snaps together. I wasn't too confident about the wiring arrangement of the TRS. I found a cable that had the 3.5mm stereo plug on one end and 2 RCA plugs...and nearby in the aisle was the 1/4 inch mono plug with RCA end...Viola...
Now that I understand it better, I will likely build a more solid and permanent cable.
Member for
10 years 9 months
Music Man 112RD sixty-five
Two OLP MM4 Silhouettes with Lace Sensors
Member for
6 years 9 monthsHosa YPP117
Reviving this thread. I bought two HOSA stereo breakout adapters to use for the RD 65 effects loops. It works very well. Red becomes effects send and black becomes effects return. All for $6 each! http://hosatech.com/product/ypp-117/
Member for
10 years 3 months
Adapter
Good on you! Kind of wonder why you didn't just put the 1/4" mono PHONE plugs on the end though instead of the RCA PHONO plugs. Hey, it's all good as long as it works! Mike.