Good, clear copy of 2475-65 schematic
mbaber1
I just replaced the PT on my MM 112 sixty-five, vintage 1977. It is working but still has a distortion problem in low power. I do have schematics but every copy I find for this chassis is very blurry. I think the 2275-130 schematic is the same except for the finals so I you can get by. I would just like to have a clear copy to save my eyes. Thanks to anyone who can find one for me. Mike
Sorry for the typo in 2471 vs 2475. This may not be in the proper place on the forum, I am sorry if it isn't. Mike
Member for
12 years 3 monthsI emailed Steve a gif and pdf
I emailed Steve a gif and pdf copy of the originals that came with my '74 210 Sixty-Five some time ago, don't see it on the site, but send me your email address and I'll send you a copy.
Ian
enginears@hotmail.com
PRS custom 24 guitar Tampas Green
Squire Strat
Ovation Ballader
Successful transformer replacement, amp is now working. One of the capacitors on the rectifier shorted and took the power transformer out. Don't wait for that to happen to you before you do the cap replacement. I drew schematics and layout drawing of the rectifier board before I started. I was getting funny resistance readings with the old transformer still in the circuit and I wanted to be sure of what was there before I started. The schematic of my amp was blurry and hard to read and there are no drawings of any of the boards, that would be really handy to have. Note: it looks like there are only 2 power supplies used so check other model amplifier schematics to get one you can read better. Also found out that the drawing in the MM service bulletin does not match the 100-65 transformer from Mojotone. Andy Johnson kindly supplied me with the data sheet for their transformer. Aug. 22, 2017
Member for
8 years 11 monthsthanks for the rapid reply
In reply to I emailed Steve a gif and pdf by inertian
Ian,
thanks for the rapid reply. I have already emailed you. I was originally going to say I wanted the PDF file but being able to edit the GIF file might be nice too>
Thanks, Mike
Member for
12 years 3 monthsMike -
Mike -
Sent you the gif and pdf schematics, if you have any questions please post here or email me directly.
I have a '74 210 Sixty-Five that I am trying to get healthy (distortion at low volume) and a '76 410 Sixty-Five I am recapping.
Good luck getting your amp running, be interested to hear what you found the source of the problem to be.
Member for
5 years 1 monthMe too!
In the internet you can find only the blurry schematics.
If it would be possible, can you send me a copy of the 2475-130 schematic (12ax7)?
Thanks a lot
Chris
Member for
12 years 3 months2475-65 Schematic
In reply to Me too! by cfortner
I only have the 2475-65 schematic, message me your email address and I'll send it out to you tonight.
Member for
12 years 3 monthsHere's a good clean copy in
Here's a good clean copy in jpg and pdf. I COULD email the full sized scan if anybody wants it. It's too large to post here. Mike.