There are different screw sets for Fender amps. The ones for UL twins are shorter. They use cage nuts. Do you mean the ones from 60's-70's? The ones from my 787 twin will NOT work. They thread in to the TOP edge of the chassis and not through both sides of the chassis. How long are your screws? I will measure the ones from my bassman.
I have a 70's era Music Man 112RP, not a Fender. I'm trying to determine if Fender screws will work with this amp, but I understand Fender and MM are different thread sizes.
I'll have to take the back panel off and unscrew one of them to measure the length.
You asked about whether Fender screws would work. My point was that there are different Fender screw lengths. I don't know how long the RP screws are and what type of attachment they use, be it screws with nuts or cage nuts.
Go to the old site(marked archive on the front page) and use THOSE links to look them up. Growing pains! The new site still has some glitches in it. Mike.
Chassis Strap Screws - New Thread
I need a set of four screws, nuts and washers for my MM 112RP. Mine are a mess, and one is missing.
Does anyone know of a current source for these? Will Fender screws/nuts work, or not?
Will these work?
http://www.tubesandmore.com/products/P-H264-4
Thanks so much,
Tom Hanser
Seattle, WA
Screws
In reply to Chassis Strap Screws - New Thread by thanser
There are different screw sets for Fender amps. The ones for UL twins are shorter. They use cage nuts. Do you mean the ones from 60's-70's? The ones from my 787 twin will NOT work. They thread in to the TOP edge of the chassis and not through both sides of the chassis. How long are your screws? I will measure the ones from my bassman.
Screws
In reply to Screws by mm210
I have a 70's era Music Man 112RP, not a Fender. I'm trying to determine if Fender screws will work with this amp, but I understand Fender and MM are different thread sizes.
I'll have to take the back panel off and unscrew one of them to measure the length.
Screws
You asked about whether Fender screws would work. My point was that there are different Fender screw lengths. I don't know how long the RP screws are and what type of attachment they use, be it screws with nuts or cage nuts.
Tilt Back Legs
Steve it must be my night for things to go wrong but the link will not open. Is the problem with my computer. None of the above links open!!
Links.
Go to the old site(marked archive on the front page) and use THOSE links to look them up. Growing pains! The new site still has some glitches in it. Mike.