Skip to main content

Music Man Hardware

Full Name
Thomas Hanser
Music Man Equipment
112 RP

Member for

10 years 7 months

thanser Tue, 06/24/2014 - 21:29

I need a set of four screws, nuts and washers for my MM 112RP. Mine are a mess, and one is missing.

Does anyone know of a current source for these? Will Fender screws/nuts work, or not?

Will these work?

http://www.tubesandmore.com/products/P-H264-4

Thanks so much,

Tom Hanser
Seattle, WA

Music Man Equipment
MM 2-10-65

Member for

10 years 9 months

mm210 Wed, 06/25/2014 - 15:36

In reply to by thanser

There are different screw sets for Fender amps. The ones for UL twins are shorter. They use cage nuts. Do you mean the ones from 60's-70's? The ones from my 787 twin will NOT work. They thread in to the TOP edge of the chassis and not through both sides of the chassis. How long are your screws? I will measure the ones from my bassman.

Full Name
Thomas Hanser
Music Man Equipment
112 RP

Member for

10 years 7 months

thanser Wed, 06/25/2014 - 18:18

In reply to by mm210

I have a 70's era Music Man 112RP, not a Fender. I'm trying to determine if Fender screws will work with this amp, but I understand Fender and MM are different thread sizes.

I'll have to take the back panel off and unscrew one of them to measure the length.

Music Man Equipment
MM 2-10-65

Member for

10 years 9 months

mm210 Thu, 06/26/2014 - 05:43

You asked about whether Fender screws would work. My point was that there are different Fender screw lengths. I don't know how long the RP screws are and what type of attachment they use, be it screws with nuts or cage nuts.

Full Name
Joseph Beggy
Music Man Equipment
Music Man 212HD One Thirty
Strat 1993 Delux.
Gibson 335
Yamaha CPX 15
Kiso- Suzuki G 150 (1974)

Member for

10 years 9 months

JoJo Thu, 08/28/2014 - 17:31

Steve it must be my night for things to go wrong but the link will not open. Is the problem with my computer. None of the above links open!!

Music Man Equipment
MM 2-10-65

Member for

10 years 9 months

mm210 Fri, 08/29/2014 - 16:06

Go to the old site(marked archive on the front page) and use THOSE links to look them up. Growing pains! The new site still has some glitches in it. Mike.